In the world of craftsmanship in pursuit of the ultimate mirror luster, the mirror jet polishing machine is undoubtedly a magical “lightsaber”, but in order to control it well and accurately realize the gorgeous transformation of metal, plastic and other material surfaces, many precautions in operation must be strictly observed.

In the world of craftsmanship in pursuit of the ultimate mirror luster, the mirror jet polishing machine is undoubtedly a magical “lightsaber”, but in order to control it well and accurately realize the gorgeous transformation of metal, plastic and other material surfaces, many precautions in operation must be strictly observed.

Before embarking on this journey through the mirror, the “physical examination” of the equipment is crucial. Carefully check whether the power cord of the polishing machine is damaged and whether the plug is firm, this small link is related to the safety of electricity, once the electricity leaks, the consequences are unimaginable. At the same time, check whether the pipeline connection of the spraying system is tight, whether the nozzle of the spray gun is blocked, if the pipeline leaks and the nozzle is not smooth, not only the polishing effect is greatly reduced, but also may cause abnormal pressure and damage to the equipment.

The choice of operating site should not be underestimated. It is important to choose a well-ventilated space, because the friction between the abrasive and the workpiece during the polishing process can produce dust, which can not only harm the respiratory health of the operator, but also accumulate on the electrical equipment and bury the fire hazard. In addition, the site needs to be kept dry to avoid moisture coming into contact with live parts and causing short-circuit faults.

When the work is ready to go, the fixation of the workpiece is a critical step. It is important to use the appropriate gripper to hold the workpiece firmly and ensure that it does not move at high speed jetting. Loose workpieces are like wild horses, not only cannot be polished evenly, but can also be thrown off by the strong jet force, causing personal injury and material loss.

Adjusting the polishing parameters is even more delicate. The injection pressure needs to be carefully set according to the material, hardness and surface roughness of the workpiece, and if the pressure is too high, the fragile workpiece may be “injured” and leave dents; If the pressure is too low, the polishing effect is like a dragonfly dotting water, and it is difficult to meet the mirror requirements. The selection of abrasives and flow control are also exquisite, different materials match different particle size of abrasives, the flow rate is too large, the abrasive is accumulated and wasted and easy to scratch the workpiece, the flow rate is too small, and the polishing efficiency is low.

During the polishing process, the operator must wear protective equipment throughout the process, and the protective glasses can block the splashing abrasive particles to avoid eye injury; Dust masks can effectively filter dust and protect the respiratory tract; Gloves prevent direct contact between hands and high-speed moving parts, ensuring the safety of hands.

Never turn off the device immediately after polishing. The abrasive supply should be shut down first, the equipment should be idled for a while, and the residual air flow should be used to dry the residual abrasive and moisture on the surface of the workpiece to prevent subsequent rust or affect the subsequent processing process. After that, turn off the power and air supply in order, and then clean up the remaining abrasives and debris in and around the equipment to prepare for the next mirror journey.

Controlling the mirror jet polishing machine is a double test of skill and carefulness. Only by strictly abiding by these precautions can it be stably output, polish each piece of ordinary workpiece into a shining mirror boutique, and shine brightly in the fields of industrial manufacturing and jewelry processing.